Solar SWMS · Australia-wide

SWMS for Solar Installers — Compliant in 2 Minutes

AI-powered Safe Work Method Statement for solar PV and battery installation. $9.99 per SWMS.

$9.99 per SWMS · First one free · No credit card

QuickSWMS generates compliant Safe Work Method Statements for solar panel installers and battery storage contractors. Solar installation combines two major HRCW categories: working at heights on roofs and working on energised electrical services (especially DC). Our AI produces a solar-specific SWMS in 2 minutes for $9.99.

Why solar installers need a SWMS

Solar installation involves working at heights (almost always HRCW Category 1), working on or near energised electrical installations (HRCW Category 13, especially for DC which remains energised from the panels whenever light hits them), and manual handling of heavy solar panels and inverters. A comprehensive SWMS covers the safe approach to each of these.

HRCW categories that apply

Under Australian WHS Regulations, these high-risk construction work categories commonly apply to solar installers:

HRCWRisk of a person falling more than 2 metres
HRCWWork on or near energised electrical installations or services

Common hazards in solar work

Every solar installer SWMS generated by QuickSWMS identifies and addresses these specific hazards (and more, based on your job details):

Falls from roofs during panel installation

Electric shock from DC side (always live when sunlight hits panels)

Arc flash from DC faults (more dangerous than AC)

Manual handling injuries from panels (20-25kg each) and inverters

Falls from ladders during access

Struck by panels during handling on roof

Heat stress and UV exposure from prolonged roof work

Battery system hazards (thermal runaway, electrolyte, hydrogen)

Control measures we include

Your solar installer SWMS will document specific control measures following the hierarchy of controls:

Roof edge protection or harness/anchor system per AS/NZS 1891.1

Cover panels with opaque material before touching DC cables

DC isolator installed at string level per AS/NZS 5033

CEC-accredited installer on site for grid connection

Insulated DC-rated tools for any PV wiring work

Mechanical lifting for panels over 20kg

Battery isolation and specific procedures per AS/NZS 5139

Weather stop-work criteria - no wet roof, high wind, lightning

Australian Standards referenced

Every SWMS for solar installers references the relevant AS/NZS standards:

AS/NZS 5033 - Installation and safety requirements for PV arrays

AS/NZS 4777.1/.2 - Grid-connected energy systems

AS/NZS 5139 - Electrical installations - Safety of battery systems

AS/NZS 3000 - Wiring Rules

AS/NZS 1891.1 - Industrial fall-arrest systems

Example solar activities

QuickSWMS handles SWMS for all these solar installer activities and more:

▸Residential rooftop solar installation

▸Commercial PV system installation

▸Home battery installation

▸Solar system upgrade or expansion

▸Solar panel maintenance and cleaning

▸Inverter replacement

▸Off-grid PV system installation

▸Solar system fault finding

Your next solar SWMS in under 2 minutes

Other SWMS generators charge $29-49. Safety consultants charge $300+. QuickSWMS is $9.99 per SWMS — your first one free.

Generate Your First SWMS Free

✓ No credit card✓ First SWMS free✓ Instant PDF

Frequently asked questions

Do solar installers need a SWMS?

Yes, absolutely. Solar installation almost always involves working at heights above 2 metres AND work on or near energised electrical installations (the DC side is live whenever light hits the panels). Both are HRCW categories requiring a SWMS under Australian WHS Regulations.

What about the DC side being always live?

This is a critical point for solar SWMS. Photovoltaic panels generate DC voltage whenever light hits them — you can't 'switch off' a PV array like you can an AC circuit. A solar SWMS must document covering the panels before any DC-side work, using DC-rated isolators per AS/NZS 5033, insulated tools, and treating DC cables as always live.